ARMY > ARMY CORPS OF ENGINEERS > OMAHA DISTRICT
Place of Performance:
Within 50 miles of 3501-4119 County Road 210, Yankton, SD 57078, USA
Teaming Partner Requirements
238320 Painting and Wall Covering Contractors
General Details on this Teaming Opportunity
On or around 8 June 2012, the Omaha district will advertise Phase 1 of a Two Phase Best Value Design-Build Request for Proposal project valued from approximately $5.0 to $7.5M. The Phase 1 solicitation will close on or about 29 June 2012. In Phase 1 of the 2 phase design-build selection procedure, interested firms or joint venture entities (referred to as "offerors") submit certain specified performance capability proposals, demonstrating their capability to successfully execute the design-build construction contract resulting from this solicitation. The Government will evaluate the performance capability proposals in accordance with the criteria contained in the Phase 1 RFP and will short-list up to four (4) of the Phase 1 Offerors to compete for the design-build contract in Phase 2. There will be no site visit for the Phase 1 RFP. Site visit information, including date, time and meeting location, will be provided to the Phase 2 Offerors in the Phase 2 RFP. Work shall include the complete rehabilitation of steel tainter gates at Gavins Point Dam, South Dakota. There are 14 gates that measure 40 feet wide by 30 feet high. Work shall include but not be limited to: visual Hydraulic Steel Structure (HSS) inspection of stoplogs and tainter gates, 3-D modeling and analysis utilizing STAAD.Pro software, non-destructive testing, structural repair design, welding (per AWS D1.5M/D1.5), corrosion repair, sandblasting, lead-based paint removal over/near water, wire rope replacement, concrete spall repair, gate seal replacement, concrete construction joint material replacement, cathodic protection removal and installation, and design and replacement of hoist controls and switches. This work may be subcontracted out to other specialty contractors, as required. The Gavins Point project office has one set of spillway stoplogs (12 total measuring 3 feet-1 inches high by 42 feet-six inches wide). Only one gate can be isolated at a time due to stoplog configurations. Therefore, work shall be sequenced to be performed while the stoplogs are in place. The contractor shall have the option of fabricating temporary stoplog structures and/or working multiple shifts. Painting work shall include sandblasting spillway gates and associated features to commercial blast, preparing the final surface to SSPC 5 (white metal) and final coating the gates with a vinyl (5-E-Z) coating system with a zinc primer. Work may require the use of scaffolding, snooper crane and harness access. Contractor shall be responsible for dewatering, if required. There will be approximately 1200 square feet of paint required per side per gate with additional quantities for other related features. Taking gates off-site is prohibited. Work may require grinding of new holes for drainage including a structural analysis for altering the gate. Experience in design/analysis of Hydraulic Steel Structures (HSS) is required. Inspection of the structural integrity of the structural members of the gates, including the skin, will be required. Analysis and design of structural repairs and/or replacement of structural members that have been damaged, or severely corroded, may be required. The painting of the gate and associated features is considered the most critical aspect of this project. Contractors will be required to show successful completion of similar projects utilizing 5-E-Z vinyl painting system. Contractors shall have the following painting qualifications: QP-1 and QP-2 Contractor Certification. Qualifications may be amended at a later date.
Learn more about this Teaming Opportunity published on GovWin - the professional network where businesses exchange opportunities, resources, and information, to win more business, expand capabilities, and increase profitability.
Follow new Business Opportunities, Resources, and Assets on Twitter:
Resource Availability and Demands
New Corporate and Individual Members