This straightforward, easy to follow guide will assist you to keep your GoPro in like-new condition so you can keep on capturing your most incredible moments.
Getting proper care of your GoPro will extend the lifestyle of your camera and the quality of the video lessons you shoot! While many steps are foreseeable, there are some gopro hero3 white review great tips with this guide.
After every GoPro worthy excursion, your camera will undoubtedly be wet, dirty, sandy etc. The first step is to simply take away the camera from its situation taking care to avoid significant pieces of dirt and sand. These can damage the lens and can basically ruin your GoPro.
Take the casing you have just removed and wash it thoroughly below a regular tap. If possible as these will leave residue around the casing, try to avoid difficult water or sea salt water. Be sure to get all the grit and sand out of the sides.
Now a little trick. To avoid waiting for the case to dried up, or the chance of marring the lens with rag (especially if you have sand residue) seize a hair blow dryer.
After delicately shaking the case to get most of the water out, begin to dry the way it is with the blower taking good care not to heat up the truth too much. To do this, set up the blower towards the lowest heat environment and keep a reasonable length between the dryer and also the case.
Once the case is reasonably dry, take a lens wiping fabric or a computer display cloth to remove off the camera lens. Be sure there is no fine sand or grit on the lens or the towel as this will probably scuff the lens.
The last step here is to spray a light coat of Rain-X (the car windshield spray) to the lenses and the outside of the situation taking care not to squirt the inside. Wipe neat and dry with your screen/lens fabric.
Why the Rain-X you may well ask? This light layer serves two major purposes:
1. Water will not bubble up in front of the lens if you use the camera underwater or maybe in the rain. It would just run across the case so there aren't water bubbles in your video.
2. It will make any dirt, grit or sand very easy to completely clean off after your following adventure!
Moving on to the digital camera itself, use a wet, delicate lint-free rag or cloth to clean down everything besides the lens. For the lens, use your lenses cloth/computer screen cloth to carefully wipe from the lens.
The correct way of gopro hero 3 plus review doing so is to start in the middle of the camera lens, and wipe in small circles slowly and gradually expanding from the center until you've protected the whole lens. If necessary, moisten the material with a zoom lens cleaning solution before wiping.
Through to where you store the digital camera. Be sure to have a durable, preferably and strong waterproof case to hold your GoPro and accessories.
Losing any accessories or accidental smashing or damaging of your respective equipment, this is considerably superior to leaving your gear in a pile or throwing it in bag as this will avoid damaging the lens.
The final step is to ensure that the interior of your storage case is clean. This task is often overlooked. Perhaps you left the case available outside for a period of time on a prior adventure and dust or grit has resolved into your case.
To begin with, tip it upside down to get any boulder sized pieces out, then use both a handheld "mini" vacuum or your trusty blow drier to remove the finer particles.
I really hope this guide helps you boost the lifespan and use of your own GoPro. Now you could be a little more worry free knowing that your devices are well cared for! In the end, the whole point of the GoPro is to seize your most amazing moments without having to be concerned about ruining your camera. So go adventure!
This guide will help you increase the life-time and use of your GoPro. Now you can be a little far more worry free realizing that your equipment is well cared for! The case that people recommend you use for the GoPro is a Pelican Gopro Carrying Scenario.