keyboard_arrow_up

Asphalt milling expected next week on U.S. 14/16/20 project in Cody

Asphalt milling expected next week on U.S. 14/16/20 project in Cody

A $1.95 million highway improvement project in Cody is scheduled to enter the asphalt milling and paving stage next week between 10th Street and Cody Labs on U.S. 14/16/20, which includes 8th Street and Sheridan Avenue. "Concrete work should be finished early next week on this project, weather permitting," said Wyoming Department of Transportation resident engineer Todd Frost of Cody. "We will then start milling the project. By contract, the contractor is required to start paving operations within two working days after milling has been completed." Frost said motorists should expect work on one-half of the highway during milling and paving operations, while two-way traffic is carried on the other half of the highway. Flagging will be used at major intersections, and around the asphalt mill and paving operation as needed. Working hours are 7 a.m. to 8 p.m. The street and sidewalk improvements are happening between milepost 50.64 (Cody Labs) and milepost 51.78 (10th Street) in Cody. By contract, the project must be complete by June 15, including all seeding and clean up of the project work area. Project scope of work includes pavement rehabilitation, including asphalt milling and re-paving of three inches of asphalt pavement and asphalt wearing course; Americans with Disabilities Act (ADA) upgrades; replacement of broken curb and gutter, double gutter and sidewalk; and replacement of a traffic signal pole at the southwest corner of the 8th Street/Beck Avenue intersection at the entrance to the Buffalo Bill Center of the West. *Photo h/t WYDOT: Workers from Mountain Construction Co., of Lovell poured concrete Wednesday at the intersection of U.S. 14/16/20 and Canyon Avenue in Cody. * #reboot #news